The maintenance of labor protection shoes should start from usual. Most leather safety shoes have a certain waterproof function, but if you wear it on rainy days, you must first apply shoe polish and spray waterproof mist. Shoe polish is not applied as much as possible. Excessive shoe polish not only can not be absorbed by the leather, but also backfires, so that the labor insurance shoes get wet again.

After the labor insurance shoes are wetted by rain, proper disposal shall be carried out immediately so that the shoes will not be deformed and mouldy. After the general protective shoes are soaked in rain, if they are left there for a long time, they will easily become moldy. If you want to prevent the shoes from getting moldy, it is recommended to give the wet protective shoes several maintenance steps:

1. Use a water-absorbent fabric to absorb the moisture on the surface of the shoe. Do not wipe it too hard. The dirt attached to it will scratch the surface of the shoe. Special care should be taken.
    2. Labor protection shoes are built into newspapers or toilet paper, and replaced frequently, in order to completely absorb moisture.
    3. If it reaches a semi-dry level, it should be placed in a shoe last to prevent deformation, and then placed in a ventilated place to dry.
    4. After completely dry, maintain according to the general maintenance method.